Francotyp-Postalia KS 4000 OL, Operator'S Manual

Page: 1 / 122

Operator Manual
Inserting system KS 4000 OL / OLC
About your new inserting system
2
This operator manual is designed for users who have been instructed in
the operation of the Inserting System KS 4000 OL/OLC.
This operator manual is one part of the complete documentation available
for the Inserting System KS 4000 OL/OLC. It describes typical operating
procedures for configurations
– with a single-sheet feeder
– with a single-sheet feeder and supplement feeder
– with automatic cutter (for processing continuous-feed paper)
– with automatic cutter and supplement feeder
– with automatic cutter and cross-fold function (for processing
continueous-feed A3 and broadsheet formats)
– with automatic cutter, cross-fold function and supplement feeder.
Detailed descriptions (about functions, technical data, installation,
maintenance, programming) of individual components can be found in the
“Instruction Manual Inserting System 4000” and in the for “Operating
Instructions Cut-Sheet-Feeder” and/or “Operating Instructions Automatic
Forms Cutter” (depending on the configuration of your system).
Keep this operator manual readily available and near the machine.
The following symbols and cautions represent important safety warnings
in this manual:
Warning! indicates a potential hazard which may result in injury.
Caution! indicates a potential hazard that may result in damage to
your inserting system or which may impair the processing of
documents.
Tips marked in this way offer advice and suggestions on the effi-
cient and troublefree use of the inserting system.