manualshive.com logo in svg

Fortress Technologies ES210, User Manual

Share
Download
Fortress Technologies ES210 User Manual Download Page 32

Bridge GUI Guide: Administrative Access

17

agreement, click to accept them. (Once accepted the 
agreement does not display.)

or

If an administrative logon banner has been configured 
(Section 2.2.1.9)—click to accept its terms. (There is no 
administrator logon banner by default.)

3

On the 

Logon to Fortress Security System

 screen, enter a 

valid 

Username

 and 

Password

.

NOTE:

 Default

complexity re-

quirements force pass-
words to be changed on
all three preconfigured
accounts when the ac-
counts are first used. If
password requirements
are changed to permit
the defaults, first-time
logons to 

Maintenance

and 

Logviewer

 will not

force password changes.

4

Click 

LOGON

.

Figure 2.1. Bridge GUI 

Logon

 screen, all platforms

5

If prompted to do so, enter and confirm a new password for 
the account and click 

SUBMIT

.

You will be prompted to create a new password if:

You are logging on to the Bridge for the first time.

The account password has expired or has been expired 
for non-conformance (refer to Section 2.2.1.7).

The 

User must change password:

 

Yes

 option is in effect 

for the account you are trying to log on (Section 2.2.2).

You can optionally view current password complexity 
requirements by clicking 

Complexity Requirements

 at the 

bottom of the 

Create a new password

 dialog. 

NOTE:

 You can

view but not edit

the list against which
passwords are checked
by clicking 

Password Dic-

tionary: 

VIEW

. 

If 

Pass. Dictionary

 is enabled

 

(refer to Section 2.2.1.8), new 

passwords are checked against the list of words used by 
the function. You can pre-check the password against the 
list by clicking 

Pass. Dictionary:

 

CHECK

 

PASSWORD

. The 

message 

Not Blacklisted

 will be returned if the entry passes 

the check; 

Blacklisted!

 indicates that the entry failed the 

check and cannot be used. By default, the

 

password 

dictionary check is not in effect, and it is labeled 

disabled

.

6

If you were prompted to create a new password, the 

Logon 

to Fortress Security System

 screen displays again: re-enter 

the account 

Username

, enter the new 

Password

, and click 

LOGON

.

Summary of Contents for ES210



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands