manualshive.com logo in svg

Fortress Technologies ES210, User Manual

Share
Download
Fortress Technologies ES210 User Manual Download Page 176

Bridge GUI Guide: Security Configuration

161

Figure 4.24. Advanced View 

Global Auditing Settings

 frame, radio-equipped platforms

4.6.2.1

Logging Administrative Activity by Event Type

You can specify which events can be sent to the audit log by 
three broad types:

Login

 - When 

Enabled

, logon activity by subject 

administrators can be sent to the audit log. When 

Login

 is 

Disabled

, the logon activity of subject administrators will not 

be sent.

Security

 - When 

Enabled

, if 

Configuration

 (below) is also 

Enabled

, any changes made by subject administrators to 

the Bridge’s security settings can be sent to the audit log. 
When 

Security

 is 

Disabled

, security reconfiguration by 

subject administrators will not be sent.

Configuration

 - When 

Enabled

, if 

Security

 (above) is also 

Enabled

, all changes made by subject administrators to the 

Bridge’s configuration can be sent to the audit log. If 

Security

 is 

Disabled

 when 

Configuration

 is 

Enabled

, all 

changes except those to security settings can be logged. 
When 

Configuration

 is 

Disabled

, Bridge reconfiguration by 

subject administrators will not be sent (even if 

Security

 

logging is 

Enabled

).

In addition to the conditions described at the beginning of this 
section (4.6.2), whether or not events of an 

Enabled

 type are 

actually sent to the audit log depends on whether the event 
meets the interface and Fortress security status criteria for 
audit logging configured in the rest of the 

Global Auditing 

Settings

 frame (below).

All three event types are 

Enabled

 by default.

4.6.2.2

Logging Administrative Activity 

by Interface and Fortress Security Status

You can filter administrative activity sent to the audit log by the 
kind of management interface the administrator is logged on 

Summary of Contents for ES210



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands