A logic probe will show open on the correct wire, then show ground when the door unlock switch is
pressed.
Identify the Blue/Brown power door unlock circuit wire at the driver kick panel.
29. Connect the Green wire from the control module harness to the Blue/Brown power door unlock
circuit wire at the driver kick panel.
30.
NOTE:
Connect only if system will be used in Lot Mode.
NOTE:
A DVOM connected to the correct wire will show 12V, then show 0V when the factory disarm
switch is activated.
A logic probe will show open on the correct wire, then show ground when the factory disarm switch
is activated.
Identify the Violet/Brown factory disarm circuit wire at the driver kick panel.
31. Connect the Light Green/Black wire from the control module harness to the Violet/Brown factory
disarm circuit wire at the driver kick panel.
32.
NOTE:
A DVOM connected to the correct wire will show 0V, then show 12V when the door lock switch is
pressed.
A logic probe will show ground on the correct wire, then show power when the door lock switch is
pressed.
Identify the Grey/Brown all lock motor circuit wire at BCM C2280C Pin 2.
33. Connect the White/Blue wire from the control module harness to the Grey/Brown all lock motor
circuit wire at BCM C2280C Pin 2.
34.
NOTE:
A DVOM connected to the correct wire will show 0V, then show 12V when the remote unlock
switch is pressed.
A logic probe will show ground on the correct wire, then show power when the remote unlock
switch is pressed.
Identify the Brown/Green driver door unlock motor circuit wire at BCM C2280C Pin 3.
35. Connect the Brown wire from the control module harness to the Brown/Green driver door unlock
motor circuit wire at BCM C2280C Pin 3.
36.
NOTE:
A DVOM connected to the correct wire will show 0V, then show 12V when the door unlock switch
is pressed.
A logic probe will show ground on the correct wire, then show power when the door unlock switch
is pressed.
Identify the Green/Violet passenger door unlock motor circuit wire at BCM C2280E Pin 23.
37. Connect the Light Green wire from the control module harness to the Green/Violet passenger door
unlock motor circuit wire at BCM C2280E Pin 23.
INSTALLATION (Continued)
201
3
Fiesta - Key Start
Vehicle Security
7
Page 7 of 9
SK9L2J-19G364-AA
© Copyright Ford 201
1
FoMoCo