INSTALLATION (Continued)
6.
NOTE:
Do not cut the override programming
button off of the harness, it is used for all
installations.
NOTE:
Refer to the vehicle specific wiring
diagram(s) before proceeding
Referring to the vehicle specific wiring section
for the system being installed, gather all
individual wires that will be routed to the same
areas of the vehicle into groups. Cover each
wire group with electrical tape for
approximately 18’’. Depending on the vehicle,
there will be 2 to 5 different wire groups.
Trim the unused wires approximately 6 - 8’’
7. Tape the harness sections together, making sure
from the module.
to cover all of the unused wires.
Vehicle Preparation
8. Remove the left hand scuff plate and cowl trim
panel.
9. Remove the 2 lower instrument panel steering
column cover screws and the cover.
2013 Mustang
Vehicle Security
2
Page 2 of 8
SK9L2J-19G364-AA
© Copyright Ford 2012 FoMoCo
