Force SPARC/CPCI-520G, Technical Reference Manual

Page: 72 / 134

Front Panel and Connectors I/O-52x(G) Installation
Page 58 SPARC/CPCI-52x(G)
On-board
connectors In addition to the front-panel connectors, the I/O-52x(G) provides on-
board connectors for connection to the Base-520(G), to the CompactPCI
bus and for 2 PMC modules. An overview is shown in the following ta-
ble.
5.4.1 Ethernet #2 Interfaces
The full duplex 10BaseT/100BaseTx Ethernet #2 interface is available at
the front panel via a Twisted-Pair-Ethernet connector.
The Ethernet #2 interface is also accessible at the J5 back panel connector
via an MII #2 interface.
If Ethernet #2 gets accessed via I/O panel, the
front panel connector is normally disabled automatically, for other con-
figurations see the respective jumper settings in the SPARC/IOBP-520
Table 25 On-board connectors
Connector description and
location Connector type and sample
manufacturer part number
CompactPCI J1, J2, J4, J5 Standard CompactPCI metric,
5-row shielded connectors female
I/O-52x(G) extension connector
P6 100-pin MBUS connector female
low: for 2 slot solution
high: for 3 slot solution
PMC #1 PN11, PN12, PN14 64-pin SMD connector
PMC #2 PN21, PN22, PN24 64-pin SMD connector
Table 26 Twisted-Pair-Ethernet connector pinout
Connector Pin Signal
1 TX+
2 TX-
3 RX+
4 GND
5 GND
6 RX-
7 GND
8 GND
1
8
RJ-45 TPE