Force SPARC/CPCI-520G, Technical Reference Manual

Page: 51 / 134

Base-520(G) Installation Front Panel and Connectors
SPARC/CPCI-52x(G) Page 37
I/O panel As a separate price list item an I/O panel is available for the Base-520(G),
the SPARC/IOBP-520/CPU. An extended variant is the SPARC/CPCI-
520/AccKit/CPU which contains additionally to the I/O panel the follow-
ing cables:
–a serial splitter cable for the front panel and the I/O panel
–a flat ribbon SCSI cable for the I/O panel
–a Micro D-Sub SCSI cable for the front panel
–and a Twisted-Pair-Ethernet cable for the front panel or I/O panel.
The I/O panel supports the following interfaces:
• Fast/Wide SCSI #1,
• MII #1 Ethernet,
• Serial A/B interface,
• Audio interface,
• Keyboard/Mouse,
• Parallel interface,
• and Floppy interface.
Danger
The SPARC/IOBP-520/CPU and the SPARC/CPCI-520/AccKit/CPU
is especially designed for the Base-520(G). Do not use any other I/O
panels on the Base-520(G).
Use only the front panel or the backpanel Ethernet interface, not
both. Check the configuration of your I/O panel.
All switches on the Base-520(G) concerning the SCSI-bus termina-
tion must be configured so, that the corresponding backplane termi-
nator (SW5-2) is disabled! This is necessary as the I/O panel includes
automatic termination for the backplane SCSI-bus.