Force SPARC/CPCI-520G, Technical Reference Manual

Page: 27 / 134

Installation
SPARC/CPCI-52x(G) Page 13
The following figure is intended to get an overview over all available
main components of a SPARC/CPCI-52x(G).
Figure 5 Schematic exploded mechanical construction view
Caution
The SPARC/CPCI-52x(G) is a sytem board. According to the Com-
pactPCI Specification PICMG 2.0 R2.1, the front panel of the
SPARC/CPCI-52x(G) shows a triangle. To ensure proper functioning
of the board, plug it exclusively in a system slot marked by a triangle.
Danger
The Lithium battery of the RTC/NVRAM provides a data retention
of at least 7 years summing up all periods of actual battery use.
Therefore FORCE COMPUTERS assumes that there usually is no
need to exchange the Lithium battery except for example in the case
of long-term spare part handling.
Please observe the following:
• Exchange the battery before 7 years of actual battery use have
elapsed.
• Exchanging the battery always results in data loss of the devices
which use the battery as power backup. Therefore, back up
affected data before exchanging the battery.
• Always use the same type of Lithium battery as is already
installed.
SCSI SERIAL A + B SERIAL A + B
Ethernet Ethernet
MIC SPK
LED
MODE DIAG
RST HLT
UPA 64S
UPA 64S
Creator Graphic Card Creator Graphic Card
Memory Modules
PMC Card PMC Card
KBD
PMC
Ethernet Ethernet
PMC
Ethernet Ethernet
PMC # 2 PMC # 1 PMC # 1
local PCI
2 PMC modules
I/O-52x(G)
UPA64S card
Memory modules
Base-520(G)