Foma P703i, Manual

Page: 471 / 510

2
To carry out the communication using the FOMA phone,
the following conditions are required:
・ The personal computer to be used can use the FOMA
USB Cable (option).
・
The PDA to be used should support FOMA packet
communication and 64K data communication.
・ Within the FOMA service area
・
For packet communication, the access point should
support packet communication of the FOMA.
・ For 64K data communication, the access point should
support the FOMA 64K data communication or ISDN-
synchronous 64K.
Even when these conditions are satisfied, if the base
station is congested or the radio wave conditions are
bad, you may not carry out the communication.
For the data communication, the following operating
environment is required for your personal computer:
p
The operation on the upgraded OS is not guaranteed.
p The memory requirements and hard disk space size may vary depending
on the system environment.
Conditions of packet communication and
64K data communication
About Operating Environment
Item Description
PC main unit PC/AT compatible model
When using the FOMA USB Cable (option): USB port
(Universal Serial Bus Specification Rev1.1 compliant)
Display resolution 800 x 600 dots, high color 16 bits or
more recommended.
OS Microsoft
®
Windows
®
2000 Professional,
Windows
®
XP Professional/Home Edition (Japanese
version in each)
Memory
requirements
Microsoft ® Windows ® 2000 Professional: 64 Mbytes or
more
Windows
®
XP Professional/Home Edition: 128 Mbytes or
more (Japanese version in each)
Hard disk
space size
Unused memory space of 5 Mbytes or more
When you set the CD-ROM on your personal computer, an alert
message might appear in the screen as shown below. This alert
message appears depending on the security settings of Internet Explorer,
but you can use your computer without any problem.
Click “ はい (YES)”.
※ The example message shown in the screen below is for when you are
using Windows
®
XP. The message might differently appear depending
on the environment of your computer.
The following hardware and software are required
besides the FOMA phone and personal computer:
・
FOMA USB Cable (option) or FOMA USB Cable with
Charge Function 01 (option)
・ Provided “FOMA P703i CD-ROM”
The following two ways are available for connecting the
FOMA phone to another device:
Connect the FOMA phone to a personal computer
provided with the USB port using the FOMA USB Cable
(option). (See page 3)
This way of connection applies to all types of
communications such as packet communication, 64K
data communication, and data transfer.
p Set “USB mode setting” to “Communication mode” for data
communication.
Operate “
m
Other settings USB mode setting
Communication mode”.
p
You need to install the P703i communication setup files (driver)
before use.
By using infrared rays, you can send/receive data
between your FOMA phone and another FOMA phone,
mobile phone, or personal computer provided with the
infrared data exchange function.
This applies to data transfer only.
Necessary Devices
Information
p Purchase a dedicated FOMA USB Cable or FOMA USB Cable with
Charge Function 01. The USB cable for personal computers cannot be
used because the shape of the connector differs.
p In this manual, operations are described with the way using FOMA
USB Cable.
Connect FOMA phone to Other Devices
Using FOMA USB Cable
Using Infrared Data Exchange