Foma P703i, Manual

Page: 473 / 510

4
2
Connect the USB connector of the FOMA USB
Cable to the USB terminal of the personal
computer.
Information
p Do not forcibly insert the FOMA USB Cable. Malfunction may result.
Insert each connector in the correct direction at the correct angle;
otherwise, you will fail connection. When the direction and angle are
correct, you can insert a connector smoothly without the strong force. If
you fail to insert a connector, check its shape and direction once more
without inserting a connector forcibly.
p Purchase a dedicated FOMA USB Cable. (The USB cable for personal
computers cannot be used because the shape of the connector differs.)
p Symbol “ ” appears on the FOMA phone when the FOMA phone
recognizes the connection with the personal computer after you install
the communication setup files (driver) for packet communication or 64K
data communication. Before you install the communication setup files
(driver), the FOMA phone does not recognize the connection with the
personal computer, and symbol “
” does not appear.
■ Removing
1. While holding down the release buttons of the external connector
of the FOMA USB Cable, straight pull out the connector.
2. Pull out the FOMA USB Cable from the USB terminal of the
personal computer.
Connector terminal
External connector
(Face up “DoCoMo” logo
of the connector for
insertion)
FOMA phone
USB terminal
USB connector
FOMA USB Cable
Personal
computer
Information
p Do not disconnect the FOMA USB Cable forcibly. Malfunction may result.
p Do not disconnect the FOMA USB Cable during data communication.
Erroneous operation or malfunction of the personal computer or
FOMA phone, or loss of data could result.
p Do not connect/disconnect the FOMA USB Cable in succession.
Once you connect the cable, wait for a while, then disconnect it and
vice versa.
Release button
Release button
Installing the communication setup files (driver) is
required when you connect the FOMA phone to your
personal computer via the FOMA USB Cable for the first
time.
p Operate as the user who has the PC administrator right.
1
Connect the FOMA phone and the FOMA USB
Cable (option). (See page 3)
2
Start Windows
®
, then set the provided “FOMA
P703i CD-ROM” into the personal computer.
3
Close the “FOMA P703i CD-ROM” display.
p This display automatically appears when you set “FOMA P703i
CD-ROM” into the personal computer. It may not appear
depending on the settings of your personal computer. In this case,
go to step 4.
p If this display appears during installation of the “P703i
communication setup files” (driver), close the display.
4
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable, which is
already connected to the FOMA phone, to the
personal computer.
5
Start installation.
Pop-up message “ 新しいハードウェアが見つかりました (New
hardware was found)” appears for a few seconds from the indicator
of the task bar, then the display below appears.
Select “
いいえ、今回は接続しません (No, do not connect now)” and
click “ 次へ (Next)”.
p This display may not appear depending on the personal computer
you use.
Installing Communication Setup Files
(Driver)
For Windows
®
XP