Foma P703i, Manual

Page: 49 / 510

47
Confirming before Use
You can select whether to correct the time automatically or set it manually.
1
m
Clock Set time Automatic or Manual
Automatic . . .Corrects the date/time automatically. The setting is completed.
If the time is not automatically corrected such as when “ ” is displayed and the date/time has not been
set, the display for manually correcting the time appears. Follow step 2 to set the date/time. However, the
display for manually correcting the time does not appear when you set the date/time by Initial Setting.
Manual . . . . . .Sets the date/time manually.
p When “Notice call cost” is set to “ON”, the display for entering your Terminal Security Code appears. Enter your
Terminal Security Code.
2
Enter year, month, date and time.
Use
M o
to move the cursor and enter numbers by the numeric keys.
p Enter the A.D. year.
p Enter the time on the 24-hour basis.
p To enter one-digit numeral for the date and time, enter two digits beginning with “0” as in
“01” through “09”.
Information
p When an unset function is found, the Initial Setting display for an unset function or the confirmation display asking whether
to update software programs appears, each time you turn on the power.
p
The completed settings are valid even when Initial Setting is interrupted by an incoming call or canceled by pressing
h
or
r
midway.
p
When the power is automatically turned on by alarm notification, the Initial Setting display does not appear even if there is
any unset function.
+ m - 3 - 1
Set Time
Setting Date and Time
Setting at purchase Automatic
< >
■ About date/time correction function
The time displayed on the FOMA phone is corrected according to the clock information obtained from the network.
The time is corrected when you turn on the power, etc. If you want to set the time with a lag, set the time manually.
p
Some few second errors might occur. You might not be able to correct the time depending on the radio wave conditions,
or the i-
α
ppli program set for the i-
α
ppli Stand-by display.
Information
p
You can set the clock also during a call.
p
You cannot use the following functions unless the clock is set:
・ Storing date/time of Redial/Dialed Calls/Received Calls (see page 60)
・ Storing recording date/time of Record Message and Voice Memo (see page 82)
・
Storing recording date/time of Video-phone Record Message and Movie Memo (see page 82)
・
Calendar (see page 136)
・
Alarm (see page 352)
・
Schedule (see page 354)
・
ToDo (see page 358)
・ Software Update (see page 442) ・ i-
α
ppli Auto Start (see page 275)
・ Pattern data update of Scanning Function (see page 447) ・ Auto Reset Setting of Notice Call Cost (see page 364)
・ Function menu “Input time” while entering characters (see page 389) ・ Auto Power ON/OFF (see page 351)
・ Function menu “Shooting date” of the Finder display (see page 185)
p
The FOMA phone has an internal backup battery. The set time is stored in the internal backup battery so is kept even
when you change the battery. However, the time could be reset if the battery is detached for two or more weeks. In this
case, charge the FOMA phone and then set the clock again. Also, when using the FOMA phone for the first time after
purchase, attach the battery to the FOMA phone and then charge it. This charges the internal backup battery as well.
p This function supports clock settings from 00:00 on January 1, 2006 through 23:59 on December 31, 2037.