Foma P703i, Manual

Page: 373 / 510

371
Network Service
This service provides an answer message for
incoming voice calls/video-phone calls and then
holds voice mail messages on behalf of you when
you are in a place where radio waves do not reach,
the power is turned off, or you cannot answer calls.
p
When Record Message (see page 80) is simultaneously
activated and you want to give Voice Mail Service priority,
set its ring time shorter than that for Record Message.
p When you do not answer an incoming voice call or video-
phone call with the Voice Mail Service activated, the call is
recorded as a missed call in “Received calls”, and the
“Missed call” desktop icon appears on the Stand-by
display.
Step 1: Set the service to “Activate”.
Step 2: The caller records a voice message/video
message.
※
Step 3: Play back the message.
※
If the caller wants to skip playback of the answer message
and record a message such as when in a hurry, he/she
can immediately switch to the recording mode by pressing
“#” while the answer message is played back.
Voice Mail
Using Voice Mail Service
■ About Voice Mail Service
p
Voice Mail Service is valid for voice calls and video-phone
calls.
p A voice mail message can be recorded for up to three
minutes. Twenty messages can be recorded respectively for
voice calls and video-phone calls and held at the Center for
up to 72 hours.
p When a voice mail message of a video-phone call is retained
at the Voice Mail Service Center, you are notified by an SMS
message.
p Make a voice call at “1412” to change the Voice Mail
setting for video-phone calls.
p
32K video-phone calls cannot be connected to the Voice
Mail Service Center.
p When a Chara-den call is connected to the Voice Mail
Service Center, DTMF operation is not available. Switch to
“Send DTMF tone” on the Function menu. (See page 86)
p When a call comes in while Voice Mail Service is set to
“Activate”, the ring tone (specified by “Select ring tone”) will
sound. (You can change the ring time for incoming calls.
See page 371.) If you answer the call within the specified
time, you can start talking. If you do not answer, the call is
connected to the Voice Mail Service Center.
p You can just press keys to connect an incoming call to
the Voice Mail Service Center. Also, you can connect the
call that comes in during a call to the Center.
Basic Flow of Voice Mail Service
< >
1
m
Voice mail
Do the following operations.
Use Voice Mail Service
Item Operation/Explanation
Play
messages
You can play back messages recorded as
the Voice Mail.
YES Operate following the voice
guidance.
Activate YES YES
Enter a ring time (seconds).
p Enter from “000” through “120” in three
digits.
p
You can activate also by selecting
“Activate” from the Function menu of
“Check setting”.
Deactivate YES
p
You can deactivate also by selecting
“Deactivate” from the Function menu of
“Check setting”.
Set ring time You can set the ring time until the call is
connected to the Voice Mail Service Center.
Enter a ring time (seconds).
p Enter from “000” through “120” in three
digits.
p
You can set the ring time also by selecting
“Set ring time” from the Function menu of
“Check setting”.
Check setting You can check the setting contents of Voice
Mail Service.
Setting You can switch the setting contents of Voice
Mail Service.
YES Operate following the voice
guidance.
Message
notification
You can set the ring tone to sound when a
new message is recorded. The ring tone set
for “Mail” of “Select ring tone” sounds for
about five seconds.
YES or NO
Erase icon You can erase the Voice Mail icons (such
as ) from the Stand-by display.
YES
Setting at purchase
YES