Foma P703i, Manual

Page: 502 / 510

33
AT+GMR
[M]
Displays the version of the
FOMA phone.
−
AT+GMR
Ver1.00
OK
AT+IFC=n,m
[M]
[&F][&W]
Selects the flow control method. n: DCE by DTE
ｍ : DTE by DCE
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
Default: n, m = 2.2
AT+IFC?: Inquires the set value.
AT+IFC=2,2
OK
AT+WS46=n
[M]
[&F][&W] Selects the wireless
communication network of the
FOMA phone. n=22: W-CDMA (Wideband CDMA) only specifiable.
(default)
AT+WS46=22
OK
ATA
[M]
Performs the receiving process in
the mode when the FOMA phone
received the incoming call.
−
RING
ATA
CONNECT
ATD
[M]
Performs the automatic outgoing
process to the FOMA phone
according to the contents
specified in the parameter and
dial parameter. <cid>: 1 to 10
Displays the APN defined by +CGDCONT.
When calling cid1, you can omit the phone number like
“ATD
_
99
___
#.”
ATD _ 99 ___ 1#
CONNECT
ATEn
[M]
[&F][&W] Sets whether echo-back is
issued to the DTE in the
command mode. n=0: Issues no echo-back.
n=1: Issues echo-back. (default) ATE1
OK
ATHn
[M]
Places the FOMA phone into the
on-hook state. n=0: Disconnects the line. (can be omitted) (During packet communication)
+++
ATH
NO CARRIER
ATIn
[AT][M]
Displays the ID code. n=0: Displays “NTT DoCoMo”.
n=1: Displays the product name. (same as +GMM)
n=2: Displays the version of the PPP packet function.
(same as +GMR)
ATI0
NTT DoCoMo
OK
ATI1
FOMA P703i
OK
ATOn
[M]
Returns from the online
command mode to the online
data mode during
communication. n=0: Returns from the online command mode to the
online data mode. (can be omitted)
ATO
CONNECT
ATQn
[M]
[&F][&W]
Sets whether the result code is to
be displayed for the DTE. n=0: Displays the result code. (default)
n=1: Does not display the result code. ATQ0
OK
ATQ1
(“OK” is not returned at this
time.)
ATS0=n
[M]
[&F][&W]
Sets the number of rings
required until the FOMA phone
automatically receives an
incoming call. n=0: Does not automatically receive an incoming call.
(default)
n=1 to 255: Automatically receives an incoming call with
the specified number of rings.
(when n ≧ 10, does not automatically receive a packet
(PPP) incoming call, then the line is disconnected after
about 30 seconds.)
ATS0?: Inquires the set value.
ATS0=0
OK
ATS0?
000
OK
ATS2=n
[M]
[&F]
Sets the escape character. n=43: Default
n=127: Makes escape processing invalid.
ATS2?: Inquires the set value.
ATS2=43
OK
ATS2?
043
OK
ATS3=n
[M]
[&F]
Sets the carriage return (CR)
character. n=13: Default (n=13 only specifiable)
ATS3?: Inquires the set value.
ATS3=13
OK
ATS3?
013
OK
ATS4=n
[M]
[&F]
Sets the line feed (LF) character. n=10: Default (n=10 only specifiable)
ATS4?: Inquires the set value.
ATS4=10
OK
ATS4?
010
OK
AT command Outline Parameter/Explanation
Command execution
example