Foma P703i, Manual

Page: 490 / 510

21
For packet communication, you can specify whether to
notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a
great care to notify your caller ID.
You can use AT commands (
_ DGPIR command) to
specify “caller ID notified/not notified” before dial-up
connection.
1
Start the communication software such as
“Hyper Terminal”.
p See page 19 for details on how to operate “Hyper Terminal”.
2
Use the _ DGPIR command (see page 31) to
specify “caller ID notified/not notified”.
p
To automatically add “184 (not notify)” for outgoing or incoming
call, enter the following:
AT _ DGPIR=1
p
To automatically add “186 (notify)” for outgoing or incoming call,
enter the following:
AT _ DGPIR=2
3
Confirm that “OK” appears on the display.
■ “Phone number” for connecting to an access point name (APN)
you register in cid
“
_
99
___
<cid No.>#”
(Example) When connecting to the access point name (APN) you
register in cid2, enter the following:
_ 99 ___ 2#
■ Resetting/Confirming the access point name (APN) settings
You can use AT commands to reset/confirm the access point name
(APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid=1 returns to “mopera.ne.jp”
(default), and for cid=3 returns to “mopera.net” (default); the settings for
cid=2 and cid=4 through cid10 are reset to being unregistered if you reset
them.
(Entry method)
AT+CGDCONT=
(When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the display.
(Entry method)
AT+CGDCONT?
Set Caller ID Notified/Not Notified
1
“
スタート
(Start)” “
すべてのプログラム
(All
programs)” “
アクセサリ
(Accessories)”
“ 通信 (Communications)” Open “ 新しい接
続ウィザード (New connection wizard)”.
2
When the “ 新しい接続ウィザード (New
connection wizard)” display appears, click “ 次
へ (Next)”.
3
Select “
インターネットに接続する
(Connect to
the Internet)”, then click “
次へ
(Next)”.
4
Select “
接続を手動でセットアップする
(Manually set up the connection)”, then click
“
次へ
(Next)”.
Information
p When using DoCoMo Internet access service “mopera U” or “mopera”,
you need to set your caller ID to be “notified”.
p If the entered AT command is not displayed, enter “ATE1 ”.
■ Specifying “caller ID notified/not notified” in dial-up network
Also by dial-up network setting (see page 21), you can add “186 (notify)”
or “184 (not notify)” to each access point number.
When you specify “186 (notify)” or “184 (not notify)” using both the
_ DGPIR command and dial-up network setting, the caller ID is set as
follows:
p To connect to “mopera U” or “mopera”, you need to notify your caller ID.
Set Dial-up Network for Windows
®
XP
Dial-up network
setting (cid = 3) Caller ID notification
setting by
_ DGPIR
command
Notify/Not notify caller ID
_ 99 ___ 3# Not set Notify
Not notify Not notify
Notify Notify
184 _ 99 ___ 3# Not set Not notify
(“184” specified in the dial-up
network has a priority)
Not notify
Notify
186 _ 99 ___ 3# Not set Notify
(“186” specified in the dial-up
network has a priority)
Not notify
Notify