Foma P703i, Manual

Page: 164 / 510

162 Safety Settings
2
YES
You can store your face data files in Face Reader and use it for authentication when releasing IC Card Lock or
PIM Lock. To use Face Reader, you need to store three or more face data files and set “PIM/IC security mode”
to either “Face reader” or “Double security”.
To use Face Reader, store 3 or more face data files. You can store up to 10 face data files.
1
m
Lock/Security Lock setting Face reader setting
Enter your Terminal Security Code Store OK
Face to the front, and locate the face within the guide frame. You can
prevent the failure in authenticating the face data file, which results
from the difference in the position of the face at storing and
authenticating the data.
When your face is recognized, the recognition frame for the eyes and
mouth is displayed and the guide frame becomes green. When the
recognition frame is not displayed or it comes off your eyes and
mouth, place your face off the frame; then change the facing direction
of your face to correctly display the recognition frame.
p The number of face data files is displayed by the bar on the
Face Data Reading display.
2
Press
O o
( ).
The face data file is shot.
p When the face data file could not be recognized, select “OK” to return to step 1.
Information
p
You cannot change PIM/IC Security Mode when the face data files stored by Face Reader Setting are less than three, or
during PIM Lock or IC Card Lock.
Face Reader Setting
Using Face Reader
< >
■
Notes on using Face Reader
p The dirty camera might result in erroneous operation. Use this function after wiping it with a soft cloth to clean the dirt off.
p In environment where the face is exposed to strong light and the brightness significantly differs depending on the region of
the face, the face will not be recognized easily. In this case, storing might become difficult or the recognition rate (the rate
of correct identification) might be lowered. Adjust so that the face is exposed to even light.
p
The face might not be recognized normally when its entire part is exposed to the light and becomes white.
p
Storing the face might become difficult or the recognition rate might be lowered when the face conditions are as described
below:
・
When the features of the face (eyes, mouth, nose, and eyebrows, etc.) are hard to see as they are covered by hair,
glasses, or a mask
・ When the brightness significantly differs depending on the region of the face such as when you are under the light in a
dark place
p The recognition rate might rise by reacting in accordance with the face conditions such as by raising the hair so that the
eyes, nose, mouth, and eyebrows are clearly visible (taking the glasses and mask off) or moving to a place where the face
is exposed to even light. The recognition rate rises also by storing the face data file additionally.
p The face authentication technology does not completely guarantee that you are recognized as yourself. Accordingly, we
are not at all responsible for damages resulting from the use of this product by a third party or when the damages are
caused by what you could not use the function because of wrong authentication by Face Reader.
Store
Setting at purchase Not stored
Face Data Reading display
Stored number
bar
Guide
frame
Recognition
frame