Foma F905I, Manual

Page: 122 / 532

120
Security Settings
✔
INFORMATION
･
Even with Lock on close, making a call by pressing the
switch of Flat-plug Earphone/Microphone with Switch
(optional) is available.
･
When Lock on close is "ON", it is activated by turning the
power OFF and ON. Lock on close is activated after
Omakase Lock, if active, is canceled.
･
The functions below are available.
- Turning power ON/OFF
- Receiving a voice, videophone or PushTalk call
- Auto update of Data Center
- Switching displaying/hiding calendar layout
- Receiving i-mode mail, MessageR/F, SMS
*
- Receiving Area Mail
- Starting Omakase Lock
- Downloading ToruCa from IC card reader
- Reactions to Location request of GPS
* When receiving with the FOMA terminal open, none of receiving
actions such as displaying the receiving or reception result screen,
emitting ring alert are not taken.
◆ Indicating activation of Lock on close
with a light <Security indicator>
You can set if you indicate status of Lock on close with a
light.
1
m
e
[Settings & NW
services]
e
43
e
Authenticate
e
1
or
2
❖
When Security indicator is set
If the FOMA terminal is closed and the Lock on close is
activated, the light flashes in blue for about 3 seconds.
When set to other than "Right after", if the set time
elapses, the light flashes in blue for approximately 3
seconds to indicate that Lock on close was activated. Note
that when the light flashes in white for approximately 3
seconds, it indicates that Lock on close was not activated.
Restricting calls/mail/data transfer
Accepting/rejecting calls from
specified phone numbers
Accepting/rejecting incoming call can be set for each
phone number saved in the FOMA terminal phonebook.
･
To use this function, specifying Accept/Reject call for
each phone number and Specified caller setting are
required. The settings and the operations of Accept/
Reject call are as listed below.
* The call or PushTalk call from a specified phone number is
disconnected without activating ring alert and the caller hears a busy
tone.
･
This function is activated only when the other party
sends caller ID.
･
Rejected calls are recorded as missed calls.
･
If Ring time is set to "0 Sec." for Voice Mail or Call
forwarding, Voice Mail or Call forwarding is activated
and the call is not stored as a received call.
･
Combination of Caller ID request service and
Anonymous caller is recommended when used.
◆ Specifying phone numbers to accept/
reject <Accept/Reject call>
Accepting/rejecting incoming call is set for phone
numbers saved in the FOMA terminal phonebook.
1
p
e
Search the phonebook
e
Place the
cursor on a phonebook entry to set and
m
e
353
e
Authenticate
e
Select
a phone number
e
1
-
3
･
To accept/reject calls from specified phone
numbers, activate settings of Specified caller in
succession to the above step.
✔
INFORMATION
･
When you change or delete the phone number with Accept/
Reject call is set, this setting is canceled. Set Accept/Reject
call again for the new number.
Setting
Accept/Reject call for each phone
number
Accept call Reject call No setting
Specified
caller Cancel
settings Accepted Accepted Accepted
Reject call Accepted Rejected
*
Accepted
Accept call Accepted Rejected
*
Rejected
*