manualshive.com logo in svg

Fluke OMNIFiber, User Manual

Share
Download
Fluke OMNIFiber User Manual Download Page 85

OMNIS

CANNER

  User Guide

5 - 18

Cable Trace

Tracer/Toner 

is a cable tracing function that assists in tracking cables

hidden in walls, ceilings, floors, or patch panels by generating a signal
that can be converted into an audible tone by Cable Tracer II (sold
separately) or any other equivalent tracing device.

1. Attach the end of the cable you want to trace
to the OMNIS

CANNER

 using a patch cord and the

Channel Adapter or the Link Adapter. Make sure
that the cable is not grounded, as a grounded
cable will weaken the signal.

A multi-tone trace signal will begin transmitting.
To enhance the signal, insert a grounding plug
into the ground jack located left of the DB-9 Serial

Connector. A grounding plug is included in the optional Cable Tracer II
kit; you may use any grounding cable that has a standard insulated
phone tip plug.

2. To determine the cable path use the multi-tone sound as a guide and
simply trace along the wire where the tone is loudest. The tracer needs
to be within one foot of the hidden cable.

Press ESC to exit the 

CABLE TRACE 

screen.

Summary of Contents for OMNIFiber









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands