manualshive.com logo in svg

Fluke OMNIFiber, User Manual

Share
Download
Fluke OMNIFiber User Manual Download Page 54

4 - 3

OMNIS

CANNER

  User Guide

Press ESC to return to the 

SETUP 

screen.

Autotests

Select 

Autotests 

to display the 

AUTOTESTS

 screen. It contains a list of

standard Autotest specifications supported by OMNIS

CANNER

. Standards

are grouped by TIA, ISO, VENDOR, OMNI, IEEE, ATM, and AS/NZ.

If there are Autotest specifications in a folder, it will appear full 

,

otherwise it will be empty 

.

Highlight a folder containing items 

 and press

ENTER to display the list of Autotests contained in
that folder.

Use the 

é

 or 

ê

 arrow key to highlight a specific

Autotest.

Copper tests are marked with a 

 twisted pair

icon.

Fiber optic tests are marked with a 

 fiber icon.

Press 

 (Set Default) to select it as the

Autotest to run.

Press 

 (Detail) to review the Autotest’s limits.

Viewing Details for Copper and Fiber Autotests

For 

 twisted pair cabling the Autotest Detail screen consists of four

pages.

Use the 

 and 

 function keys to browse

through the pages.

The screen titles show the standard being used to
set the limits (e.g. Cat 6 Link).

The first page displays the Configuration of the
Autotest (Basic Link, Channel, or Permanent Link).

Summary of Contents for OMNIFiber









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands