manualshive.com logo in svg

Fluke OMNIFiber, User Manual

Share
Download
Fluke OMNIFiber User Manual Download Page 10

1 - 1

OMNIS

CANNER

  User Guide

Chapter 1 - Introduction

The Digital Solution for Fiber and Copper

OMNIS

CANNER

 is the most advanced hand-held certification and diagnos-

tic tool for the verification of copper links. The Category 7, 6, 5E
(Enhanced), 5 and ISO Class F, E, D, and C tester has an extended fre-
quency range of  300 MHz. OMNIS

CANNER

 provides full software compli-

ance with TIA and ISO/IEC requirements for measurement reporting
and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss,
Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition,
OMNIS

CANNER

 measures Length, Delay, Impedance, and Resistance on

coaxial cabling.

OMNIF

IBER

 MM (multimode) and OMNIF

IBER

 SM (single-mode) expand

the tester’s capabilities to certify installed fiber links against TIA and
ISO standards. Fiber cabling can be verified at 850, 1300, 1310, and
1550 nm wavelengths.

The Graphical User Interface

OMNIS

CANNER

’s graphical user interface consists of a backlit LCD display,

quick access menus, arrow keys, and descriptive menu options that
guide you through certifying or troubleshooting cabling systems.

OMNIR

EMOTE

For test and certification of twisted pair cabling, the OMNIS

CANNER

requires the OMNIR

EMOTE

 unit at the opposite end of the cabling link

under test. OMNIS

CANNER

 communicates with OMNIR

EMOTE

 to obtain

status and perform measurements from both ends of the link.

OMNIR

EMOTE

 is equipped with a speaker to generate tones, and several

colored LEDs to indicate overall test results and status.

Summary of Contents for OMNIFiber









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands