Fluke OMNIFiber, User Manual

Page: 20 / 136

1 - 11
OMNIS
CANNER
User Guide
Attaching the OMNIS
CANNER
Fiber Adapters
Note
Use dust caps to protect the connectors from dirt. Keep the connec-
tors covered when the Fiber Adapters are not in use. This helps to
ensure that contaminants from handling fiber do not affect test
measurements.
Note
Both OMNIF
IBER
adapters have 160 pin connector
covers. Keep the 160 pin connectors covered when
the Fiber Adapters are not in use.
To attach a fiber adapter to OMNIS
CANNER
proceed
as follows:
1. Remove the 160 pin connector cover from the
OMNIF
IBER
adapter by gently pressing the black
push button latches. The cover will be released.
2. Push the OMNIF
IBER
adapter onto
OMNIScanner’s 160 pin connector until it snaps
into position.
3. To remove OMNIF
IBER
, use the push button
latches to release the secured adapter.
4. Protect OMNIF
IBER
’s 160 pin connector by snapping the cover back in
place.
Attaching the Connector Adapter
OMNIF
IBER
has one ST-style connector port (TX) and one threaded
optical receiver port (RX) which accepts different connector adapters.
Attach the included ST connector adapters to the OMNIF
IBER
RX receiver
ports before connecting jumpers.
Note
Keep the connectors covered when the Fiber Adapters are not in use.
Several connector adapters are available (as optional accessories) for
the OMNIF
IBER
optical receiver port (RX).