manualshive.com logo in svg

Fluke OMNIFiber, User Manual

Share
Download
Fluke OMNIFiber User Manual Download Page 115

OMNIS

CANNER

  User Guide

11 - 2

MultiMediaCard Maintenance

Multi Media Flash memory cards store data just like a PC stores data on
the hard disk. Saved files are broken into segments and stored in any
free segment of the multi media flash memory card. Prior to the initial
use, the MMC may require formatting. Use the OMNIS

CANNER

2 

Format

MMC 

function to perform this task.

To format the MultiMediaCard, select 

Format

MMC

 in the 

SETUP 

screen. A gauge will indi-

cate the progress. (See Chapter 4 - Setup: 

For-

mat MMC

 for further information.)

Formatting time varies depending on the size of
the MultiMediaCard, the 8MB card can be
formatted in about 2 minutes.

The MMC Structure

The file structure on the MMC is Windows

®

 file system compatible.

When saving test results to the MMC, Project folders will be created,
which allow you to easily retrieve the files with Scanlink. Each folder
can be expanded to view all tests (Circuit IDs) it contains.

Configurations stored on the MMC by the 

OMNIS

CANNER

 Configura-

tion 

software will be contained in a Configuration folder.

Summary of Contents for OMNIFiber









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands