manualshive.com logo in svg

Fluke OMNIFiber, User Manual

Share
Download
Fluke OMNIFiber User Manual Download Page 18

1 - 9

OMNIS

CANNER

  User Guide

Displaying OMNIS

CANNER

 and OMNIR

EMOTE

 Results

OMNIS

CANNER

 and OMNIR

EMOTE

 are used together to perform measure-

ments, which allow the scanner to verify installed links or assist in the
diagnosis of physical layer network problems. To accomplish these
measurements, OMNIS

CANNER

 and OMNIR

EMOTE

 are connected at either

end of a network-cabling link. The end at which the scanner is con-
nected, is referred to as the ‘Scanner end’, and the end at which the
remote unit is connected, is referred to as the ‘Remote end’.

OMNIS

CANNER

 displays test results for both ends of the link. Press 

or 

  to toggle the display between Scanner and Remote test

results.

Note

Refer to the graphics in Chapter 2 - Getting Started: 

Typical Test

Configurations 

for instructions on connecting OMNIS

CANNER

 and

OMNIR

EMOTE

 for basic link and full channel tests.

Indicates

OMNI-

SCANNER

test

results.

Indicates
OMNI-

REMOTE

test
results.

Toggles the display
from Scanner to Remote end
test results.

Summary of Contents for OMNIFiber









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands