Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 37 / 278

Getting Acquainted
Basic Features
1-17
1
A
Model number of the installed module.
B
The current date and time.
C
Owner’s logo. See “Changing the Logo on the HOME
Screen” on page 1-26.
D
Battery status icon. For more information about the
battery, press
F
; then select Battery Status.
E
Press
E
to see the hardware and software versions and
calibration dates for the tester and the installed module.
F
Press
D
VFL to activate the visual fault locator.
G
If the last test run was not saved, you can press
C
Unsaved Result to see the test’s results.
H
Press
A
Change Test to switch test modes. See
K
.
I
Action prompts. For most screens, this area prompts you
on what keys to press.
J
Important test and job settings. To change these
settings, use
KLMN
to highlight a setting; then
press
t
. Selecting TEST LIMIT or FIBER TYPE lets you
change the item. Selecting the limit’s or type’s name lets
you see that item’s settings. You may also access the
tester’s settings by pressing
S
.
K
The test mode, which determines what type of test will
run when you press
T
. The available modes depend
on which module is installed. To change the test mode,
press
A
Change Test.
L
The name of the current screen.