Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 221 / 278

Creating Custom Fiber Types and Test Limits
Creating Custom Test Limits
11-5
11
Figure 11-1. LIMIT TABLE EDITOR Screen
ajt30f.eps
A
The fiber types tested by this limit. A custom limit can
include up to 5 fiber types. Three generic fiber types
are added by default to new custom limits.
To add an existing fiber type or create a new type,
press
A
Add Fiber Type. To delete a fiber type, press
B
Remove Fiber Type.
B
The limit’s name. Press
C
Edit Name to change the
name.
C
Lists of OTDR and loss/length limits for each fiber type.
Exist is shown if a limit is present; a dash is shown if no
limit is present.
To see or edit a limit, highlight a cell under OTDR LIMIT
or LL LIMIT; then press
t
.
D
Space for test limits supported by future products.
A
D
C
B