Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 154 / 278

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
7-2
Changing the Connector Adapter
You can change the module's input connector adapter
(Figure 7-1) to connect to SC, ST, LC, and FC fiber
connectors. Additional adapter styles may be available.
Check the Fluke Networks web site for updates.
W
Caution
•
Cover all connectors with protective caps when
not in use.
•
Store the extra connector adapters in the canisters
provided.
•
Do not touch the photodiode lens (see Figure
7-2).
•
Do not overtighten the adapter or use tools to
tighten the adapter.
amd37f.eps
Figure 7-1. SC, ST, LC, and FC Connector Adapters
To install a connector adapter, refer to Figure 7-2 and do
the following:
1 Locate the slot in the module connector and the key on
the adapter ring.
2 Holding the adapter so it does not turn in the nut,
align the adapter's key with the module connector's
slot and slide the adapter onto the connector.
3 Screw the nut onto the module connector.