Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 207 / 278

10-1
Chapter 10
Memory Functions
About Saving Tests
You can save test results on a removable memory card or in
the tester’s internal memory. The tester can use
MultiMediaCard (MMC) or Secure Digital memory cards
(SD).
To select a location for saving tests, press
S
then select
CURRENT FOLDER on the Job tab.
Tip: To avoid confusion regarding the location of test
records, save test results on a memory card whenever
possible.
You can save results from any fiber test, except the real
time trace.
Each test record can hold bi-directional results from each
type of test (except ChannelMap, which you run in just one
direction). The test direction assigned to saved results is
determined by the THIS END setting (in Setup) used when
the test was run.
You can save the last test you ran anytime before you run
another test or view stored records. This excludes
FiberInspector images and power meter results, which you
must save at the time of viewing.
If SAVE WARNING on the System tab is enabled, the tester
warns you if you are about to do something that will delete
an unsaved test from temporary memory. The unsaved test
is retained in temporary memory even if you turn off the
tester or remove the battery pack.