Fluke OF-500-01 OptiFiber, Technical Reference Handbook, Page: 46 / 278

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
1-26
Changing the Logo on the HOME Screen
The tester’s HOME screen shows the Fluke Networks logo
by default.
To change the logo on the HOME screen:
1 Use a graphics application to create a graphic with the
following format:
•
Dimensions: 240 x 60 pixels maximum.
•
Colors: 128 colors maximum, with an indexed color
palette.
•
File format: Save the graphic as an 8-bit bitmap file
(.bmp) or an 8-bit Portable Networks Graphic file
(.png).
Note
The graphics application may list 256 colors with
the 8-bit setting; however, if your graphic uses
only 128 or fewer colors, it should work in the
tester.
2 Connect the tester to the PC via the serial or USB port.
3 In LinkWare select Utilities > OptiFiber Utilities >
Custom Logo. Locate and select the .bmp or .png logo
file; then click Open.
4 Restart the tester to see the new logo.
Note
If the logo’s format is not valid, the tester deletes
the logo and uses the default logo.
To restore the Fluke Networks logo, select Utilities >
OptiFiber Utilities > Restore Default Logo; then restart the
tester
Enabling Software Options
To see the options available with the version of software
installed in the tester press
F
, highlight Enable
OptiFiber Options; then press
t
. Additional options may
be available with software updates.
To see details about the available options press
H
from
the OPTIFIBER OPTIONS screen.
To enable an option contact Fluke Networks to get a
registration key; then select the option on the OPTIFIBER
OPTIONS screen to enter the key.