Flexim FLUXUS F401, Operating Instruction

Page: 11 / 160

2 Safety instructions
FLUXUS F401 2.6 Safety instructions for electrical work
11
UMFLUXUS_F401V2-1EN, 2020-06-12
2.6 Safety instructions for electrical work
• Electrical work may only be carried out if there is enough space.
• The degree of protection of the transmitter is only ensured if the cables are firmly con
-
nected to the transmitter and all unused connections are covered.
• The condition and tight fit of the electrical connections have to be checked at regular in -
tervals.
• The power supply unit for charging the battery may only be connected to networks up to
overvoltage category II. Use only the supplied power supply unit. For the power supply
via power cable and power adapter, observe the safety instructions in chapter 7, sec -
tion 7.2.
• The transmitter and the power supply unit must not be disassembled, see Fig. 2.1. The
transmitter does not contain any components to be maintained by the user. For repair
and service work, please contact FLEXIM.
• Observe the safety and accident prevention regulations for electrical systems and
equipment.
Fig. 2.1: Transmitter