Flexim FLUXUS F401, Operating Instruction

Page: 94 / 160

15 Data transmission
15.2 Terminal program
FLUXUS F401
2020-06-12, UMFLUXUS_F401V2-1EN
94
• Enter the storage rate.
• Start the measurement.
15.2.2 Offline transmission
• Start the terminal program.
• Enter the transmission parameters into the terminal program. The transmission param
-
eters of the terminal program and the transmitter have to be identical, see section 15.3.
Transmitter settings
• Select Special Funct.\Print Meas.Val.
• Press ENTER.
The following message will be displayed if no measured values are stored.
• Press ENTER.
The following message will be displayed if the measurement values are transmitted.
The progress of the transmission of data is displayed by a bar graph.
The following error message will be displayed if an error has occurred during the serial
transmission.
Output Options\...\Serial Output\SEND ONLINE-HEAD
Notice!
During the offline transmission only those data is transmitted that is stored in the
transmitter.
Special Funct.\Print Meas.Val.
NO VALUES
Print Meas.Val.
Send Header
.................
■■■■■■
.................