The Panda Generator
9.12.14
Kapitel/Chapter 6: The Panda Generator - Seite/Page 57
Fig. 6.3.5-8: Charge Control
Charge control for DC alternator
The voltage regulator for the 12 V DC-alternator is located at
the back of the air suction housing. The housing is
streamlined for cooling purposes. The voltage regulator may
not be externally covered. The surface must be accessible
for cooling.
Fig. 6.3.5-9: Generator Power Terminal Box 230V/50Hz
Generator Power Terminal Box 230V/50Hz
To locate the Terminal box see Chapter A2.
In these terminal box there are the electrical connection
points for the AC generator. Here is also the bridge for the
protective grounding of the generator. The cover may only be
removed, if it is guaranteed that the generator cannot be
inadvertently started.
Sample Picture
Fig. 6.3.5-10: Generator Power Terminal Box 400V/50H
Generator Power Terminal Box 400V/50Hz
To locate the Terminal box see Chapter A2.
In these terminal box there are the electrical connection
points for the AC generator. Here is also the bridge for the
protective grounding of the generator. The cover may only be
removed, if it is guaranteed that the generator cannot be
inadvertently started.
Sample Picture
L
N
L
Z
L1
L3
N
L2
PE
