Fischer Panda 10000/9, Manual

Page: 8 / 246

Seite/Page 8 Inhalt/Contens 9.12.14
Inhalt / Contens
10.7.6 Measuring the Inductive Resistance 203
10.8 Generator provides no voltage 203
10.8.1 Rotor Magnetism Loss and „Re-magnetising“ 203
10.9 Engine Starting Problems 204
10.9.1 Electric Fuel Solenoid Valve 204
10.9.2 Re-start with Failure Bypass Switch 204
10.9.3 Lifting solenoid for motor stop - optional 205
10.9.4 Troubleshooting Table 206
11 Tables207
11.1 Technical Data 207
11.2 Rated current 212
11.3 Cable cross section 212
11.4 Fuel 213
11.5 Engine oil 213
11.5.1 Engine oil classification 213
11.5.1.1 Operating range: 213
11.5.1.2 Quality of oil: 213
11.6 Coolant specifications 214
11.6.1 Coolant mixture ratio 214
11.7 Types of coil 215
11.7.1 HP1 - 230V / 50 Hz 215
11.7.2 HP2 - 120V / 60 Hz 215
11.7.3 HP2 - 120V / 60 Hz - Duo 216
11.7.4 HP3 - 400V / 50 Hz 216
11.7.5 HP2 - 120V / 60 Hz 216
11.7.6 DVS - 400V / 50 Hz 217
11.7.7 DVS - 120V 240V / 60 Hz 217
11.8 Resistor & inductance of the generator coil 217
11.9 Voltage values stator coil 218
11.10 Diameter of conduits 219
Generator Control Panel P6+ Manual221
Current revision status222
Hardware222
12 Safety Instructions Generator Control P6+223
12.1 Personal requirements 223
12.2 Safety instructions 223
13 General operation225
13.1 Panel Generator Control 225
13.1 Rear view 12 V-version 226
13.2 Rear view 24 V-version 227
13.3 Installation of the remote control panel 228
13.3.1 Placement. 228
13.3.2 Terminal connections 228
13.3.3 Function of the jumpers 229