The Panda Generator
9.12.14
Kapitel/Chapter 6: The Panda Generator - Seite/Page 51
Fig. 6.3.3-5: Injection nozzles
Injection Nozzles
If the engine does not start after the ventilation, the fuel
injection lines must be ventilated individually.
Fig. 6.3.3-6: Glow Plugs
Glow plugs
The glow plugs serve the pre-chamber for the heating with
cold start. The glow device must be operated, if the
temperature of the generator is below 16 ° C. This is
practically the case with each start. The glow device and
starter button are set in a way that neither may be used at the
same time.
