1.0 INTRODUCTION
UL S2203
CyberCat 254/1016 Operation Manual
1-33
FM
P/N: 06-326-2
Rev 6, 09/2015
Exhibit 1-31: Programming Features Cont.
Circuit or
Component
Program Feature or Option
Permitted
in UL
864?
(Y/N)
Possible Settings
(Defaults shown bold)
Settings
permitted
in UL 864
Notes
Smoke
Control
Graphic Card
6-Zone
Smoke Group Configuration - Continued
LED Function
Y
No Function Assigned
/ On
– All Network Device / Auto
LED Function / Fault LED
Function / On – Device
Activation / On – Device
Trouble / On Device Active or
Trb / On – Device PreAlm /
On – Device Active or PreAlm
/ On – Zone Process / On –
Zone Trouble / On – Zone
Supervisory / On – Zone
Abort / On – Zone Disabled /
On – Zone PreAlm / On –
Zone Alarm / On – Zone
PreDischarge / On – Zone
Release / On – Zone Test
Alarm / On – Zone Action /
On – Panel Silence / On -
Panel Drill / On – Panel
Walktest / On – Panel Comm
OK / On – Panel Power OK /
On – Panel Buzzer Active /
On - Any Network Device /
On – Any Network Device
Trouble / On – Any Network
Device PreAlm / On – Any
LED Active / On – All LED
Active / Off – All LED Active /
Off – Any Network Device /
Off – All Network Device
Timer
Y
0
– 255 seconds
Device Assignments
(max. 50 device addresses)
Y
Panel:
0
- 128
Loop:
0
- 4
Address:
0
- 254
Self-Test
Y
Disabled
/ Enabled
Time for Weekly Self-Test
Y
Day: Sunday – Saturday
(Wednesday)
Time:
6:00 AM
(24 hr.)
Summary of Contents for CyberCat 1016
Page 135: ......
