5.0 SYSTEM DIAGNOSTICS
UL S2203
CyberCat 254/1016 Operation Manual
5-15
FM
P/N: 06-326-2
Rev 6, 09/2015
5.6.5
HISTORY DIAGNOSTICS
The History Diagnostics screen allows you to transmit history messages onto the peripheral bus for test
purposes only. To utilize any of the features on this screen, you must enter a Level 3 password. From the
Diagnostic Menu 3 screen, press the F4 button to view the History Diagnostic screen:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
T R A N S M I T H I S T O R Y
B
T E S T M E S S A G E S : O F F
C
C U R R E N T E V E N T : 0 3 3
D
0 0 0 0 0 0 0 0 0 1 0 0
Exhibit 5-23: History Diagnostics Screen
•
Row B – Allows you to turn ON/
OFF
automatic transmission of pre-set history messages for testing
purposes, starting with the event number shown on Row C. When “ON”, the panel will transmit an
event every 10 seconds. Use the +/- buttons to change the value at cursor. The default value is OFF.
The event number shown on Row C will increment after each transmission.
•
Row C – Allow you to select a specific event number (e.g.,
CURRENT EVENT:033
). If automatic
transmission is OFF, pressing ENTER will transmit the selected event onto the peripheral bus. The
message “
**SENDING**
” will show briefly to confirm the event transmission.
Use the ◄► arrow
buttons to position the cursor over the field; then press the +/– buttons to change the value at cursor.
•
Row D – Allows selection of the history transmission variables when ENTER is pressed for a specific
event. Consult with Fike Product
Support for further details. Use the ◄► arrow buttons to position the
cursor over the field; then press the +/– buttons to change the value at cursor.
Summary of Contents for CyberCat 1016
Page 135: ......
