1.0 INTRODUCTION
1-26
CyberCat 254/1016 Operation Manual
UL S2203
Rev 6, 09/2015
P/N: 06-326-2
FM
Exhibit 1-24: Programming Features Cont.
Circuit or
Component
Program Feature or Option
Permitted
in UL
864?
(Y/N)
Possible Settings
(Defaults shown bold)
Settings
permitted
in UL 864
Notes
LED
Annunciator
20-Zone
Address
Y
2 - 32
LED Function (1-40)
Y
No Function Assigned
/ On
– Device Activation / On -
Device Trouble / On – Device
Active or Trb / On – Device
PreAlarm / On – Device
Active or PreAlm / On – Zone
Process / On – Zone Trouble
/ On – Zone Supervisory / On
– Zone Abort / On – Zone
Disabled / On – Zone
PreAlarm / On – Zone Alarm /
On – Zone Predischarge / On
– Zone Release / On – Zone
Test Alarm / On – Zone
Action / On – Panel Silence /
On – Panel Drill / On – Panel
Walktest / On – Panel Comm
OK / On – Panel Power OK /
On – Panel Buzzer Active /
On – Any Network Device
Active / On – Any Network
Device Trouble / On – Any
Network Device PreAlm / On
– All Network Device Active /
Off – Any Network Device
Active / Off – All Network
Device Active / On – Any
LED Active / On – All LED
Active / Off – Any LED Active
/ Off – All LED Active / On –
Alarm Silence / On –
Supervisory Silence / On –
Trouble Silence / On – Alarm
Silence Inhibit / On – Device
Active or PreAlm(Stdy) / On –
Alarm Signal Cancel / On –
Battery Trouble
LED Assignment
Y
Device / Zone / Panel / Net
Device / LED
1
Notes:
1.
LED assignment options are tied to the specific LED function selected.
Summary of Contents for CyberCat 1016
Page 135: ......
