4.0 CONFIGURATION MENU
4-16
CyberCat 254/1016 Programming Manual
Rev 3, 08/2013
P/N: 06-539
4.2.4 HOW TO EXECUTE THE LEARN FUNCTION
The Learn function, when initiated, identifies all installed addressable devices connected to the panel’s
signaling line circuits (SLCs). The address, device type and serial number of each device is added to the
panel’s supervision list.
From the “Configuration Menu 1” screen, press the F4 key to access the “Learn” screen, as shown below:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
S E L E C T
R E S E T
M O D E :
B
N O N E
S E L E C T E D
C
P R E S S
E N T E R T O
S T A R T
D
P A N E L
W I L L
R E S E T
Exhibit 4-22: LEARN Screen
•
Row B - This field allows you to set the LEARN mode to be used. Press +/- to change from None
Selected to Learn New Devices or Learn All Devices. A complete description of each mode is
described as follows.
L
Note:
Each addressable device connected to the SLC holds its own configuration. After the
LEARN function has been completed, you can modify the configuration as needed using either the
panel configuration menus or the C-Linx programming software.
4.2.4.1
LEARN New Devices Only
The Learn New Device Only option will identify only new addressable devices connected to a signaling line
circuit (SLC). New devices will be added to the panel’s device supervision list. New devices will operate with
the default configuration held by the device. If the device that has never been incorporated into a system, it
will contain the default configuration.
From the “Learn” screen, press
+/-
keys to change to
Learn New Devices
as shown below; then press the
Enter key:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
S E L E C T
R E S E T
M O D E :
B
L E A R N
N E W
D E V I C E S
C
P R E S S
E N T E R T O
S T A R T
D
P A N E L
W I L L
R E S E T
Exhibit 4-23: LEARN NEW DEVICES Screen
The panel will reset and enter the Learn Mode:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
L E A R N M O D E
I S
A C T I V E
B
W A I T T O C O M P L E T E > >
C
0 9 : 2 7 : 4 7 A
0 3 / 1 0 / 2 0 0 9
D
A L : 0 0 0 S U : 0 0 0 T R : 0 0 0
Exhibit 4-24: LEARN Mode Active Screen
The display keypad is locked while learn mode is Active. Panel will display “LEARN MODE COMPLETE”
when process ends.
Summary of Contents for CyberCat 10-064
Page 127: ......