4.0 CONFIGURATION MENU
4-44
CyberCat 254/1016 Programming Manual
Rev 3, 08/2013
P/N: 06-539
4.5.3.2 HOW TO ASSIGN ZONES TO THE AUX/NAC CIRCUIT
The AUX NAC Zone Assignment screen allows you to set which zones can activate the circuits. From the
AUX NAC Menu, press the F2 key to access the AUX/NAC zone assignment screen:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
A U X N A C
# 3 :
M U L T I
Z O
B
Z O N E R A N G E :
0 0 1 - 0 2 0
C
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
D
- - - - - - - - - - - - - - - - - - - -
Exhibit 4-69: AUX/NAC Zone Assignment Screen
•
Row A - This field allows you to set whether the circuit shown in Row A will activate on ANY ZONE
or MULTI ZONE. To change circuit number, use the
◄►
arrow keys to move the cursor under the
circuit number field; then use the +/- keys to increment/decrement the field.
To change the Zone Selection Status of the circuit, use the
◄►
arrow keys to move cursor to the
zone selection field; then use the
+/-
keys to toggle the field (
ANY ZONE
or
MULTI ZONE
).
L
Note:
The Any Zone option sets the selected circuit to activate on the configured state for any
zone. The Multi Zone option sets the selected circuit to activate on the configured state for any
zone selected in Row D.
•
Row B - These fields allow you to set the 20 zone range that is displayed in Rows C & D. Use the
◄►
arrow keys to position the cursor under the zone range field; then use the +/- keys to
increment/decrement the group of 20 forward or backwards (Zones 001-254).
•
Row C - These numbers act as placeholders and zone number indicators for the range of zones
selected on Row B.
•
Row D - This range of fields allows you to set the zone assignment programming for the circuit
displayed in Row A if MULTIZONE is selected.
-
= not programmed for this zone
Y
= programmed for this zone
Use the
◄►
arrow keys to position the cursor under the specific zone position; then use the
+/-
keys
to toggle the status.
L
Note:
The Any Zone option sets the selected circuit to activate on the configured state for any
zone. The Multi Zone option sets the selected circuit to activate on the configured state for any
zone selected in Row D.
L
ATTENTION:
These programming options are not available at this time, but will be added to the CyberCat
panel in the future. The current CyberCat hardware does not support these features. Any changes made
to these programming features will have no effect on the panel operation.
Summary of Contents for CyberCat 10-064
Page 127: ......
