65
manual tare
Sp
Auto power off time,
display brightness,
auto power saving,
keypad buzzer and
system buzzer
d1
= auto power off time: - 0 = Off; 1 = 1 minute; 2 = 3 minute; 3 = 5 minute; 4 = 10 minute; 5 = 20 minute
d2
= display brightness (01 ~ 04). 01 = lowest, 04 = brightness.
d3
= auto power saving: - 00 = Off; 01 = On
d4
= keypad buzzer: - 0 = Off; 1 = On
d5
= system buzzer: - 0 = Off; 1 = On
Sq
Check result buzzer,
near zero value, high
limit for weighing, low
limit for weighing, high
limit for counting, low
limit for counting
d1
= check result buzzer: - 0 = Off; 1 = In; 2 = Out; 3 = Hi, 4 = Lo
d2
= near zero value. Data length = 8 with leading zero
d3
= Hi Limit for weighing. Integer only. Data length = 8 including decimal with leading zero.
d4
= Lo Limit for weighing. Integer only. Data length = 8 including decimal with leading zero.
d5:
= Hi Limit for counting. Integer only. Data length = 8 (integers only) with leading zero.
d6
: = Lo Limit for counting. Integer only. Data length = 8 (integers only) with leading zero.
Sr
Comport 1 working
mode, baud rate,
output protocol, print
stability control,
transmission interval,
auto accumulation,
number of copy, check
result control, print
format, label format
group 1 file number,
label format group 2
file number, data
length, parity,
minimum output
weight value
d1
= working mode: - 0 = Auto 1; 1 = Auto 2; 2 = Auto 3; 3 = Manual; 4 = PC; 5 = Scanner; 6 = Off
d2
baud rate: - 0 = 1200; 1 = 2400; 3 = 4800; 3 = 9600; 4 = 19200; 5 = 38400; 6 = 57600; 7 = 115200; 8 = 256000
d3
= protocol: - 0 = Protocol 1; 1 = Protocol 2; …; 8 = Protocol 9
d4
= print stability control: - 0 = no (disable); 1 = Yes (enable)
d5
= transmission interval: - 0 = int 0; 1 = int 0.5; 2 = int 1.0; 3 = int 1.5; ….; 9 = int 300.
d6
= auto accumulation: - 0 = Off (disable); 1 = On (enable)
d7
= number of copy: - 0 = 1 copy; … 7 = 8 Copy
d8
= check result control: - 0 = no (disable); 1 = Yes (enable)
d9
= print format: - 0 = Lab 1; 1 = Lab 2; 2 = Lab 3; 3= Lab 4; 4 = Lab 5; 5 = LP-50; 6 = TSC
d10
=label format group 1 file number (00~99): - 00 = file AA00; 1 = file AA01; …98 = file AA98; 99 = file AA99
d11
= label format group 2 file number (00~99): - 00 = file BB00; 1 = file BB01; …98 = file BB98; 99 = file BB99
d12
= data length: - 0 = 7bit; 1 = 8bit
d13
= parity: = 0 = none; 1 = 0dd; 2 = even
d14
= minimum output weight value: - 0 = from 00d; 01 = from 01d; …; 20 = from 20d. Data length = 2 with
leading zero
Ss
Comport 2 working
mode, baud rate,
output protocol, print
stability control,
transmission interval,
auto accumulation,
number of copy, check
result control, print
format, label format
d1
= working mode: - 0 = Auto 1; 1 = Auto 2; 2 = Auto 3; 3 = Manual; 4 = PC; 5 = CMD; 6 = Off
d2
baud rate: - 0 = 1200; 1 = 2400; 3 = 4800; 3 = 9600; 4 = 19200; 5 = 38400; 6 = 57600; 7 = 115200; 8 = 256000
d3
= protocol: - 0 = Protocol 1; 1 = Protocol 2; …; 8 = Protocol 9
d4
= print stability control: - 0 = no (disable); 1 = Yes (enable)
d5
= transmission interval: - 0 = int 0; 1 = int 0.5; 2 = int 1.0; 3 = int 1.5; ….; 9 = int 300.
d6
= auto accumulation: - 0 = Off (disable); 1 = On (enable)
d7
= number of copy: - 0 = 1 copy; … 7 = 8 Copy
d8
= check result control: - 0 = no (disable); 1 = Yes (enable)