4. Power Adaptor, Built-In Batteries and Recharging
4.1 Power Adaptor
Always use the power adaptor supplied with this instrument to avoid un-recoverable damages to this instrument.
4.2 Before Plugging in Power Adaptor to Electricity Grid
Double if the input voltage marked on adaptor data matches with the electricity grid. If not, do not plug in and
contact your dealer immediately.
5. Internal Function Settings
5.1 About Internal Function Table
To enable this instrument to meet and to give the best performance under various application requirements and
demands, a set of internal functions are built-in.
Most internal function comes with various parameters to meet various application demands and preference.
These internal functions are classified into 2 categories: -
•
User accessible functions (F1 ~ F31 of below table), do not request any password to access.
•
Other internal functions are not for access to end users and may need password to access.
Do not
attempt to access or alter any parameters without authorization to avoid system malfunction.
5.2 How to Enter & Select Internal Function
3
1.
In weighing function, press and hold
[FUNC/SET]
until instrument displays F1 and is now in internal
function mode.
2.
Release
[FUNC/SET]
.
3.
Press
[FUNC/SET]
and
[MR/UNIT]
to access the preferred internal function number.
4.
Quick access to a function number: -
•
Press
[1]
to go to F10.
•
Press
[2]
to go to F20.
•
Press
[3]
to go to F30.
•
Press
[0]
to go to F1.
5.3 Key Function during Internal Function Setting & Operation Mode
Refer to paragraph
3
for details.
3
To fulfil the metrology law of certain countries, accessing to internal function by
[FUNC/SET]
may be disabled. Contact your dealer
for details.