52
E.2 To Edit Custom Lab 2 Print Output Format
Follow the below steps to create customized printout.
1.
Depends on the working modes: -
•
Go to F21 to edit custom output for Weighing and ATM mode. Maximum 30 variants can be entered.
•
Go to F22 to edit custom output for Piece Count mode. Maximum 30 variants can be entered.
•
Go to F24 to edit custom output for Animal Weighing mode. Maximum 12 variants can be entered.
2.
Press
[Print/M+]
, then
[FUNC/SET]
until
Custom
appears.
3.
Press
[Print/M+]
,
4.
This instrument displays
Line 1
and the last variant or command (refer to paragraph
Appendix E
for
details) stored,
5.
Press
[Print/M+]
to confirm or select other variant or command by pressing
[FUNC/SET]
or
[MR/UNIT]
.
Press
[Print/M+]
to confirm and save,
6.
This instrument displays
Line 2
and the last variant or command stored,
7.
Repeat steps
4
and
5
for other lines,
8.
To finish editing, select
End
and press
[Print/M+]
to confirm,
9.
This instrument returns to and displays the current internal function number.
At this point, customized Lab2 output format editing is completed.
