Fiat SEDICI Owner'S Handbook Manual Download Page 120

Page: 120 / 266

119

❒

DISC SCAN Play

For disc scan play (playing about 10 sec-
onds of the top of the first track on each
disc), press the scan button (

) for about

1 second or more.

To release disc scan play, press the scan
button (

) again.

The “D. SCN” indicator remains lit dur-
ing disc scan play.

REPEAT Play

❒

REPEAT Play

For repeat play (playing the present track
repeatedly), press the repeat button (

To release repeat play, press the repeat
button (

) again.

The “RPT” indicator remains lit during re-
peat play.

❒

DISC REPEAT Play

For disc repeat play (playing the present
disc repeatedly), press the repeat button
(

) for about 1 second or more.

To release disc repeat play, press the re-
peat button (

) again.

The “D. RPT” indicator remains lit dur-
ing disc repeat play.

RANDOM Play

❒

RANDOM Play

For random play (playing the disc tracks
at random), press the random play button
(

To release random play, press the random
play button (

) again.

The “RDM” indicator remains lit during
random play.

❒

DISC RANDOM Play

For disc random play (playing the tracks
of all discs at random), press the random
play button (

) for about 1 second or

more.

To release disc random play, press the
random play button (

) again.

The “D. RDM” indicator remains lit dur-
ing disc random play.

Fast Forward/ Fast Reverse

Play speed increases while the up button
(

) or down button (

) is kept depressed.

(4): Fast forward

(5): Fast reverse

NOTE

❒

When the present track in REPEAT
play mode comes to its end, it returns
to normal play.

❒

If Fast Forward is kept to the end of the
disc, it returns to the first track.

SCAN Play

❒

SCAN Play

For scan play (playing about 10 seconds of
the top of each track on the present disc),
press the scan button (

To release scan play, press the scan but-
ton (

) again.

The “SCN” indicator remains lit during
scan play.

069-128 Fiat16 New GB 3-09-2008 12:00 Pagina 119

Summary of Contents for SEDICI











































































































































































































































































Search results

Summary of Contents for SEDICI

Reviews:

Related manuals for SEDICI

Brands by name

Popular brands

Fiat SEDICI, Owner'S Handbook Manual

Search results

Summary of Contents for SEDICI

Reviews:

Related manuals for SEDICI

Brands by name

Popular brands