manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 124 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 124

123

User ID Entry

Once the ID is set up, this unit displays
“SEC” to prompt you to enter your user
ID when the power is turned on again in
the case of removal of this unit or the bat-
tery.

The unit cannot be used unless the ID is
entered in the following order.

NOTE The unit does not display “SEC”
when the power is turned on within 20
seconds from the last use.

❒

With the up button (

4

) kept depressed,

press the numbered button (

19

) with

number [1].

The unit displays “- - - -”.

❒

Press the numbered buttons (

19

) with

number [1] to [4], and enter the user
ID. Each button corresponds to each
digit. Enter the stored user ID.

❒

Press program type button (

11

) for

about 2 second or more to enter.
Power is switched off.
When you switch the unit back on, it is
in radio mode for normal use.

Erasing User ID

Your stored user ID can be erased. After
erasing it, you may set a new user ID.
Therefore, you can change your user ID
as often as you like.

❒

Press the power on/off knob (

1

) to turn

off the power.

❒

With the numbered buttons (

19

) with

numbers [3] and [4] kept depressed at
the same time, press the power on/ off
know (

1

) for about 1 second or more.

The unit displays “SEC”.

❒

With the up button (

4

) kept depressed,

press the numbered button (

19

) with

number [1].
The unit displays “- - - -”.

❒

Press the numbered buttons (

19

) with

number [1] to [4], and enter the user ID.
Each button corresponds to each digit.
Enter the stored user ID.

❒

Press the program type button (

11

) for

about 2 seconds or more to enter.
The power is turned off approx, 10 sec-
onds after “- - - -” is displayed.

❒

Press the numbered buttons (

19

) with

number [1] to [4], and enter the user
ID. Each button corresponds to each
digit, and the number increases each
time the button is pressed. For exam-
ple, to raise the digit second from the
left to 3, press the numbered button
(

19

) with number [2] four times.

❒

Press the program type button (

11

) for

about 2 second or more to enter.

Power is switched off after the unit dis-
plays “SEC”.
Once the ID is set up, the ID is re-
quired at power-on when this unit or
the battery has been removed.

069-128 Fiat16 New GB  3-09-2008  12:00  Pagina 123

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments