Home
/
Fiat
/
SEDICI
/
Owner'S Handbook Manual

Fiat SEDICI, Owner'S Handbook Manual, Page: 233 / 266

Share

Page: 233 / 266

Fiat SEDICI Owner'S Handbook Manual Download Page 233

232

62J083

63J142

IF YOU CAN NOT
SHIFT AUTOMATIC
TRANSAXLE
GEARSHIFT LEVER OUT
OF “P” (PARK)

Left Hand Drive Vehicle

Vehicles with an automatic transaxle have
an electrically operated park- lock feature.
If the vehicle’s battery is discharged, or
there is some other electrical failure, the
automatic transaxle cannot be shifted out
of Park in the normal way. Jump starting
may correct the condition. If not, follow
the procedure described below. This pro-
cedure will permit shifting the transaxle
out of Park.

❒

Be sure the parking brake is firmly ap-
plied.

❒

If the engine is running, stop the engine.

❒

Make sure the key is in the “ON” or
“ACC” position.

❒

Remove the cover (1) over the button.

❒

With pushing the release button by the
key or the flat end rod, shift the
gearshift lever to the desired position.

This procedure is for emergency use on-
ly. If repeated use of this procedure is nec-
essary, or the procedure does not work
as described, take the vehicle to your deal-
er for repair.

Right Hand Drive Vehicle

Vehicles with an automatic transaxle have
an electrically operated park- lock feature.
If the vehicle’s battery is discharged, or
there is some other electrical failure, the
automatic transaxle cannot be shifted out
of Park in the normal way. Jump starting
may correct the condition. If not, follow
the procedure described below. This pro-
cedure will permit shifting the transaxle
out of Park.

❒

Be sure the parking brake is firmly ap-
plied.

❒

If the engine is running, stop the engine.

❒

Make sure the key is in the “ON” or
“ACC” position.

❒

With pushing the release button (1),
shift the gearshift lever to the desired
position.

This procedure is for emergency use on-
ly. If repeated use of this procedure is nec-
essary, or the procedure does not work
as described, take the vehicle to your deal-
er for repair.

225-232 Fiat16 New GB 3-09-2008 11:17 Pagina 232

«
...
231
232
233
234
235
...
»

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments