manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 210 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 210

209

COMPACT SPARE TIRE 
(if equipped)

1.

Wear indicator

2.

Indicator location mark

Your vehicle comes equipped with the
compact spare tire. The compact spare is
designed to save space in your storage area,
and its lighter weight makes it easier to in-
stall if a flat tire occurs. It is only intended
for temporary emergency use, until the
conventional tire can be repaired or re-
placed. The inflation pressure of the com-
pact spare tire should be checked at least
monthly. Use a quality pocket- type infla-
tion pressure gauge and set at 4.2 bar (60
psi). At the same time, check that the tire
is stored securely. If it is not, tighten it.

Note that two or more compact spare
tires should not be used on one vehicle si-
multaneously.

54G115

The compact spare tire and
wheel are intended for tem-

porary emergency use only. Continu-
ous use of this spare can result in tire
failure and loss of control. Always ob-
serve these precautions when using
this spare:
– Your vehicle will handle differently
with this temporary spare.
– Do not exceed 80 km/h (50 mph)
speed.
– Replace this spare with a standard
tire and wheel as soon as possible.
– Use of this spare will reduce ground
clearance.
o Recommended air pressure for this
spare is 4.2 bar (60 psi).
– Do not use tire chains on the com-
pact spare. If you must use tire
chains, rearrange the wheels so stan-
dard tires and wheels are fitted to the
front axle.

WARNING

– The compact spare tire has
a much shorter tread life

than the conventional tires on your
vehicle. Replace the tire as soon as
the tread wear indicator appears.
– When replacing the compact spare
tire, use a replacement tire with the
exact same size and construction.

WARNING

181-224 Fiat16 New GB  3-09-2008  11:02  Pagina 209

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments