manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 45 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 45

❒

Hook the top strap to the anchor
bracket and tighten the top strap ac-
cording to the instructions provided by
the child restraint system manufactur-
er. Be sure to attach the top strap to
the corresponding anchor located di-
rectly behind the child restraint. Do not
attach the top strap to the luggage re-
straint loops (if equipped).

Do not attach the child re-
straint top strap to the lug-

gage restraint loops (if equipped). In-
correctly attached top strap will reduce
the intended effectiveness of the child
restraint system.

WARNING

❒

Grasp the front of the child restraint
and push the child restraint forcefully
to latch the connecting bars. Make sure
they are securely latched by trying to
move the child restraint system in all di-
rections, especially forward.

❒

Return the seatback if folded.

❒

Attach the top strap referring to “In-
stallation of Child Restraint with Top
Strap” section below (if equipped).

INSTALLATION OF CHILD
RESTRAINT WITH TOP STRAP

Some child restraint systems require the
use of a top strap. Top strap anchor brack-
ets are located on the back of the rear
seatbacks. The number of the anchor
bracket provided in your vehicle depends
on the vehicle specification. 

Install the child restraint system as follows:

❒

Remove the luggage compartment cov-
er.

❒

Secure the child restraint on rear seat
using the procedure described above
for securing a restraint system that
does not require a top strap.

54G185

62J026

44

009-056 Fiat16 New GB  3-09-2008  10:13  Pagina 44

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments