Fiat SEDICI Owner'S Handbook Manual Download Page 123

Page: 123 / 266

122

User ID Setting

❒

Press the power on/ off knob (

) to

turn off the power.

❒

With numbered buttons (

) with

number [3] and [4] kept depressed at
the same time; press the power on/ off
knob (

) for about 1 second or more.

The unit displays “SEC”.

❒

With the up button (

) kept depressed,

press the numbered button (

) with

number [1].

The unit displays “- - - -”.

ANTI-THEFT SYSTEM (SEC)

Power on/ off knob – volume control
knob

Up button

11.

Program type button

19.

Numbered buttons [1] to [4]

You can set up a 4-digit ID to prevent
theft. Once you set up the ID, the unit is
inoperable without the ID when this unit
or the battery is removed.

NOTE

❒

If the wrong user ID is entered 10
times, the unit displays “HELP” and can-
not be operated.

❒

If you should forget your user ID, con-
sult your Fiat Dealership.

79J195

Text Display

Each time the text display button (20) is
pressed in MP3/ WMA mode, the display
change as follows:

Elapsed Time / Folder Name / File Name /
(Elapsed Time)

NOTE For scrolling text, hold down the
text display button (20) for 2 seconds or
more.

REPEAT Play

For repeat play (playing the present file re-
peatedly), press the repeat button (

To release repeat play, press the repeat
button (

) again.

The “RPT” indicator remains lit during re-
peat play.

RANDOM Play

For random play (playing the disc files at
random), press the random play button
(

To release random play, press the random
play button (

) again.

The “RDM” indicator remains lit during
random play.

069-128 Fiat16 New GB 3-09-2008 12:00 Pagina 122

Summary of Contents for SEDICI











































































































































































































































































Search results

Summary of Contents for SEDICI

Reviews:

Related manuals for SEDICI

Brands by name

Popular brands

Fiat SEDICI, Owner'S Handbook Manual

Search results

Summary of Contents for SEDICI

Reviews:

Related manuals for SEDICI

Brands by name

Popular brands