manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual

The Fiat Sedici Owner's Handbook Manual is a comprehensive guide providing essential information for owners of this versatile compact SUV. This manual is available for free download on our website, allowing you to access all the necessary details, instructions, and maintenance tips conveniently. Discover your Sedici's full potential at manualshive.com.

Share
Download
background image

182

60B128

You should take extreme
care when working on your

vehicle to prevent accidental injury.
Here are a few precautions that you
should be especially careful to ob-
serve:
– To prevent damage or unintended
activation of the air bag system or
seat belt pretensioner system, be sure
the battery is disconnected and the
ignition switch has been in the
“LOCK” position for at least 90 sec-
onds before performing any electrical
service work on your Fiat. Do not
touch air bag system components,
seat belt pretensioner system com-
ponents or wires.
The wires are wrapped with yellow
tape or yellow tubing, and the cou-
plers are yellow for easy identifica-
tion.
– Do not leave the engine running in
garages or other confined areas.

WARNING

– When the engine is run-
ning, keep hands, clothing,

tools, and other objects away from
the fan and drive belt. Even though
the fan may not be moving, it can au-
tomatically turn on without warning.
– When it is necessary to do service
work with the engine running, make
sure that the parking brake is set ful-
ly and the transaxle is in Neutral (for
manual transaxle vehicles) or Park
(for automatic transaxle vehicles).
– Do not touch ignition wires or oth-
er ignition system parts when starting
the engine or when the engine is run-
ning, or you could receive an electric
shock.
– Be careful not to touch a hot en-
gine, exhaust manifold and pipes,
muffler, radiator and water hoses.
– Do not allow smoking, sparks, or
flames around gasoline or the bat-
tery. Flammable fumes are present.
– Do not get under your vehicle if it is
supported only with the portable jack
provided in your vehicle.

WARNING

– Be careful not to cause ac-
cidental short circuits be-

tween the positive and negative bat-
tery terminals.
– Keep used oil, coolant, and other
fluids away from children and pets.
Dispose of used fluids properly; nev-
er pour them on the ground, into sew-
ers, etc.

WARNING

181-224 Fiat16 New GB  3-09-2008  10:59  Pagina 182

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments

Related manuals for SEDICI

Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Cadillac 2009 CTS Personalization Manual preview
2009 CTS
Brand: Cadillac Pages: 20
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50
Phonocell 6/821 Mounting Instructions preview
6/821
Brand: Phonocell Pages: 8

Brands by name

Popular brands

Load more brands