manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual

The Fiat Sedici Owner's Handbook Manual is a comprehensive guide providing essential information for owners of this versatile compact SUV. This manual is available for free download on our website, allowing you to access all the necessary details, instructions, and maintenance tips conveniently. Discover your Sedici's full potential at manualshive.com.

Share
Download
background image

2

By choosing Fiat original spare parts (re-
conditioned and non re-conditioned) you
can rely on a rapid and efficient service
provided by skilled operators, on good
equipment and a wide range of parts.

The Fiat Dealership uses Fiat original spare
parts and re-conditioned spare parts.

FIAT RE-CONDITIONED 
SPARE PARTS

They are Fiat original spare parts/me-
chanical assemblies, already used but giv-
en back to Fiat, which renews them com-
pletely to meet the same qualitative and
reliability requirements of the newly orig-
inal spare parts.

Fiat re-conditioned spare parts:

❒

give the Customers the opportunity to
buy spare mechanical assemblies (en-
gines, transmissions, etc.) at particular-
ly favourable prices;

❒

contribute to safeguard the environ-
ment by reducing scrapping operations
and the disposal of removed materials.

FIAT ORIGINAL SPARE PARTS

These spare parts ensure the reliability
and technological quality needed to trav-
el safely. Designed on the basis of the same
project of the components fitted on the
vehicle, the original spare parts undergo
very harsh tests before being produced or
re-conditioned, with the aim of being used
to keep the vehicle performance un-
changed in time.

Therefore, for an accurate and careful
maintenance, choose Fiat original spare
parts (re-conditioned and non re-condi-
tioned), which can be identified by the fea-
tures of their package and which are avail-
able only at the Fiat Dealership.

FIAT ORIGINAL SPARE PARTS AND FIAT RE-CONDITIONED SPARE PARTS 

001-008 Fiat16 New GB  3-09-2008  10:05  Pagina 2

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments

Related manuals for SEDICI

Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Brand: Jaeger Pages: 11
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
Fleetwood Bounder turbo diesel 2001 Instructions Manual preview
Bounder turbo diesel 2001
Brand: Fleetwood Pages: 166
BMW X3 xDrive28i Owner'S Manual preview
X3 xDrive28i
Brand: BMW Pages: 278
Ford FLEX 2019 Quick Reference Manual preview
FLEX 2019
Brand: Ford Pages: 10
Fiat Panda 2015 Owner'S Handbook Manual preview
Panda 2015
Brand: Fiat Pages: 204
Over Armour Offroad TX-STAMP-4-TC01 Instructions For Installation And Care preview
TX-STAMP-4-TC01
Brand: Over Armour Offroad Pages: 4
Prorack K890 Fitting Instructions Manual preview
K890
Brand: Prorack Pages: 15
Prorack K146 Fitting Instructions Manual preview
K146
Brand: Prorack Pages: 14

Brands by name

Popular brands

Load more brands