manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 147 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 147

146

LUGGAGE
COMPARTMENT LIGHT

When you open the rear door with the
luggage compartment light switch in the
“ON” position (

1

), the light comes on and

remains on as long as you keep the rear
door open.

When the luggage compartment light
switch is in the “OFF” position (

2

), the

light remains off regardless of whether the
rear door is opened or closed.

IMPORTANT Do not leave the rear door
open with the luggage compartment light
switch in the “ON” position for a long
time, or the battery will discharge.

LUGGAGE
COMPARTMENT COVER
(if equipped)

Luggage or other cargo placed in the lug-
gage compartment are hidden from view
by a luggage compartment cover.

79J128

(1)

(2)

79J053

Do not carry items on top of
the luggage compartment

cover, even if they are small and light.
Objects on top of the cover could be
thrown about in an accident, causing
injury, or could obstruct the driver’s
rear view.

WARNING

129-148 Fiat16 New GB  3-09-2008  10:36  Pagina 146

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments