manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 132 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 132

131

PEDAL

Clutch Pedal (1)

(For manual transaxle)

The clutch pedal is used to disengage the
drive to the wheels when starting the en-
gine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages the
clutch.

IMPORTANT Do not drive with your
foot resting on the clutch pedal. It could
result in excessive clutch wear, clutch
damage, or unexpected loss of engine
braking.

Brake Pedal (2)

Your Fiat vehicle is equipped with either
front and rear disc brakes or front disc
brakes and rear drum brakes. Depress-
ing the brake pedal applies both sets of
brakes.

You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
factors such as cold, wet, snow, etc.

Accelerator Pedal (3)

This pedal controls the speed of the en-
gine. Depressing the accelerator pedal in-
creases power output and speed.

(1)

(2)

(3)

79J072

If brake squeal is excessive
and occurs each time the

brakes are applied, you should have
the brakes checked by your Fiat
Dealership.

WARNING

Do not “ride” the brakes by
applying them continuously

or resting your foot on the pedal. This
will result in overheating of the brakes
which could cause unpredictable
braking action, longer stopping dis-
tances, or permanent brake damage.

WARNING

Manual transaxle

79J154

Automatic transaxle

129-148 Fiat16 New GB  3-09-2008  10:34  Pagina 131

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments